Dettagli:
|
|
Luogo di origine: | Jiangsu, Cina (continente) |
---|---|
Marca: | AMAN |
Certificazione: | CE |
Numero di modello: | AM45 |
Termini di pagamento e spedizione:
|
|
Quantità di ordine minimo: | 1 Set / Sets |
Prezzo: | US $30,000-50,000 / Sets |
Imballaggi particolari: | pacchetto standard dell'esportazione |
Capacità di alimentazione: | 100 Set / Sets per Anno |
Informazioni dettagliate |
|||
Condizione: | Nuovo | Applicazione: | bottiglia |
---|---|---|---|
Plastica elaborata: | PE PS DEI PP | Tipo di modellatura del colpo: | modanatura del colpo dell'iniezione |
Automatico: | Sì | Tensione: | customerized |
Potere (W): | 22 CHILOWATT | Dimensione (L*W*H): | 4000*1300* 2340 millimetri |
Peso: | 6,5 tonnellate | Diametro. Della vite: | 45 mm |
tasso di lunghezza/diametro della vite: | 22 | capacità teorica massima: | 227cm3 |
Potere calorifico del cilindro: | 10 CHILOWATT | Dimensione L* W dell'installazione della muffa: | 480*390 |
Pressione del circuito idraulico: | Mpa 16,0 | Volume di prodotto del modanatura: | 0.003-1L |
Spreco dell'acqua di raffreddamento: | 5 m3/h | Garanzia: | Un anno |
Servizio di assistenza al cliente fornito: | Centro di servizio d'oltremare disponibile | Porto: | Shanghai |
Evidenziare: | imbottigliatrice,macchina di rifornimento dell'acqua |
Descrizione di prodotto
Injection Blow Molding Machine
Injection blow molding machine Features
Injection blow modling machine Advantage
1. The bottle blown by this machine has perfect neck formation. Dimension tolerance control is 0.2mm only. the neck is very smooth, no flash can be seen.
2. The bottle bottom is clean, only injection point can be seen, bottle weight tolerance is onl 0.1grm.
3. The bottle parting line is untouchable
4. Wall thickness is evenly distributed
5. No wastage at all
6. Production is high (the machine can control cycle time from 9-15sec.)
7. The bottle produced by this machine is suitable to pharmaceutical bottle, no human touch.
Injection blow molding machine Technical Parameters
NO. | ITEM | UNIT | DATE |
1 | Dia. of screw | MM | 45 |
2 | Max. retical capacity | Cm3 | 286 |
3 | Total power for cylinder-heating | Kw | 10 |
4 | Clamping force of injection mold | Kn | 450 |
5 | Opening stroke | Mm | 120 |
6 | Clamping force of blow mold | Kn | 52 |
7 | Max. plate size of die (L*W) | Mm | 480*390 |
8 | Min. die thickness | Mm | 240 |
9 | Motor power | Kw | 22 |
Injection blow molding machine Parts pictures
Injection blow molding machine Main Parts
Parts Name | Brand Name |
hydraulic vale, electromagnetism valve, proportional valve. | YUKEN |
air valve and air pipe connector. | FESTO |
hydraulic hose | ISR |
sealing Parts | SEALTECH |
hydrolic motor | INTERMOT |
microcomoputer controller | TAIWAN |
contactor and relay. | SCHNEIDER |
short-circuit equipt | GMERLIN GERIN |
air tube | CAMOZZI |
conveyer motor | TAIWAN |
main motor | BEIDE |
proximity switch. | TAIWAN |
Q1:What’s your guarantee or the warranty of the quality if we buy your machines?
A1:We offer you high quality machines with high quality after-service. Also we have one year warranty of the spare parts, free of charge.
Q2:How can I install my machine when it arrives?
A2:We will send our engineer to your side as soon as you get all your machines ready , for testing and teaching your technicians how to run the machines. also we will send you a machine manual for your reference.
Q3:How about the spare parts?
A3: we will offer you a spare parts list for your reference
Entri nel vostro messaggio